We are a leading Manufacturer of rubber testing testers, breath alcohol tester, digital ferrite meter, multiparameter ph/orp/do/pressure/temperature waterproof meter, digital egg haugh tester and wall mounting breath alcohol analyzer vt-303 from Coimbatore, India.
₹ 27,690 /Piece Get Latest Price
Parameter | Abrasion, Hardness |
Display Type | Digital and Analog |
Model Name/Number | Based on Product Selection |
Accuracy | Standard |
Brand | V-TECH |
Weight | Min 4 Kg |
Voltage | 230V A/C input & 40KV A/C output |
Frequency | 50 Hz |
Usage/Application | Glass & Rubber Lining |
Phase | Single |
Rubber testing involves running a material sample through a series of tests designed to observe and analyze its properties and performance under certain conditions. For example, rubber tubing must be tested for its durability against both the liquid within it and its ambient conditions.
₹ 6,500 /Piece Get Latest Price
Brand | V Tech |
Warning Signal | Beep |
Display | LED Display |
Operating temperature | 5 - 40 Deg C |
Response time | Within 5 sec |
Unit Size | 116 X 68 X 25 mm |
Warm up time | Within 10 sec |
Sensor | Semiconductor alcohol sensor |
Minimum order quantity: 1 Piece
Three Digit Digital Display Breath alcohol Tester with mouthpiece
FUNCTION:
1. Sensor: Semiconductor alcohol sensor
2. Warm-up time: Within 10 seconds
3. Respond time: Within 5 seconds
4. Operating temperature range: 5 ~ 40 oC
5. Detection range: 0.000% - 0.199% BAC / 0.000- 0.995 mg/l
6 Digital display results (% BAC / mg/l)
7. Quick response and resume
8. Auto power-off
9. Red-colored backlight
10. Low voltage indicator
11. Power input: Use 2xAAA 1.5V alkaline batteries (not included)
12. Unit size: 116x 68x 25 mm
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 1.50 Lakh /Piece Get Latest Price
Voltage | 230 V |
Brand | VTECH |
Warranty | 10 Month |
Packing Type | Box |
Display | LCD Display |
Two display modes | SAVE and FREE |
Minimum order quantity: 1 Piece
Features:
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 14,500 /Piece Get Latest Price
Model Name/Number | VT-98196 |
Brand | V-TECH |
Weight | 400 g (14.2 oz.) |
Type Of Ph Meter | Portable |
Ph Range | 0.00 to 14.00 pH |
Dimensions | 185 x 93 x 35.2 mm |
ORP Accuracy | +-1.0 mV |
mV Range | +-600.0 mV |
mV Resolution | 0.1 mV |
ORP Resolution | 0.1 mV |
pH Resolution | 0.01 pH |
pH Accuracy | +-0.02 pH |
Connectivity | USB to PC |
Environment | 0 to 50 DegreeC (32 to 122 DegreeF) |
ORP Range | +-2000 mV |
Battery Type/Life | 1.5V AA batteries (4) |
Minimum order quantity: 1 Piece
The VT98196 is a waterproof portable logging multiparameter meter that monitors up to 7 different water quality parameters including 5 measured and 2 calculated. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, dissolved oxygen, and temperature. The probe transmits readings digitally to the meter, where data points can be displayed and logged. The use of digital communication allows for noise free transfer of data for up to 100 meters in cable length.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 90,000 /Piece Get Latest Price
Country of Origin | Made in India |
Brand | V- TECH |
Usage/Application | Laboratory |
Grade | Semi-Automatic |
Weight | 0.5 kg |
Resolution | 0.0005''/0.01mm |
Product Description
Digital Haugh Tester measures the height of egg albumen and allows you tomanually determine the Haugh unit quickly and accurately Haugh unit represents the quality of the egg, using the following formula:Haugh unit = 100*log(H-1.7*W0.37 +7.6)Where:H=height of albumen (mm)W=egg weight (g.)
Digital Haugh Tester is extremely precise and friendly to use in order to assist you withthe correct process of reading of the albumen height.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 64,610 /Piece Get Latest Price
Model Name/Number | VT303 |
Brand | V- TECH |
Accuracy | 0.006% BAC |
Warning Signal | Beep |
Parameters | Blood Alcohol Content |
Analyzing Time | 5 s |
₹ 3,750 /Piece Get Latest Price
Type Of Tachometer | Digital Tachometer |
Model Name/Number | VT TM2236C |
Usage/Application | Industrial |
Material | Plastic |
Resolution | 0.1 RPM |
Brand | V- TECH |
Accuracy | 0.05% |
Country of Origin | Made in India |
Nunes Instruments , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty.
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
Laboratory Instrument, Test Equipment,Scientific, Measuring, Precision Instrument,Analytical, Bio Medical, Survey, Electrical,Electronic Instruments ,Weather, Metrology.
₹ 1.14 Lakh /Piece Get Latest Price
Accuracy | 0.01% |
Brand | V TECH |
Geared Motor | 40W |
Range | 1 gram to 12 kg |
Facility | 180 and 90 Degree |
Display | Can Read Minimum, Maximum Average Value in grams, kilogram and newton |
Certificate | NABL For Load Cell |
Power Supply | 230V, 50HZ Internal SMPS |
Least Count | 1g |
Speed (mm/min) | 100-500 |
Minimum order quantity: 1 Piece
We are offering Peel Adhesive Tester to our client.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 62,000 /Piece Get Latest Price
Brand | V -Tech |
Flexing Speed | 45 CPM |
Power Supply | 220V AC 50 Hz |
Display Type | Digital |
Usage/ Application | Polyfilm |
Country of Origin | Made in India |
Minimum order quantity: 1 Piece
This apparatus is used to determine whether certain laminations of plastic withstand repititive strain. By attaching sample pieces of laminated plastic to the two cirucular clamping disks, via hose clamps the specimen is twisted and turned to the specific movements. This process will show a visual result of pin holding and de- lamination.
Applications:
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 51,630 /Piece Get Latest Price
Usage/Application | Industrial |
Display Type | Analog |
Brand | V Tech |
I Deal In | New Only |
Type | Plastic |
Minimum order quantity: 1 Piece
Nunes Instruments , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty.
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
Laboratory Instrument, Test Equipment,Scientific, Measuring, Precision Instrument,Analytical, Bio Medical, Survey, Electrical,Electronic Instruments ,Weather, Metrology.
₹ 34,500 /Piece Get Latest Price
Product Type | Impact Testing Machine |
Brand | V-Tech |
Impact weight | 2 LB, 4 LB, 6 LB. |
Tube Heights | 25" and 40" |
Country of Origin | Made in India |
‘V-TECH' Make Tubular Impact Tester allows both the failure point to be measured. It can be used with paints, Varnishes, plastic coating, laminations and sheet material. A sample clamp securely hold the test piece, Impact can be varied by adjusting weights or heights.
Aluminum Tube marked in inches or centimeters
Standard tube lengths are 25" and 40" Different weight 2 LB, 4 LB, 6 LB.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 2,500 /Piece Get Latest Price
Material | Stainless Steel |
Model Name/Number | VT92NM |
Brand | V-Tech |
Length | 20 - 210 mm |
Model Name | VT92NM-A |
Inking Time | 0.1 to 999 sec |
Printing Width | 15,35,50,70 mm |
Country of Origin | Made in India |
The VTPP 92NM for quick, repeatable and high accuracy proofing and colour-matching of all types of litho, web-offset, letterpress inks and varnishes. It saves time & cost as testing on printing press is not required. It can print on all sorts of coated and un-coated paper, board, plastic film, laminates, metal etc.
Features:
₹ 21,500 /Piece Get Latest Price
Material | Mild Steel |
Automation Grade | Automatic |
Weight | 47.5 g |
Brand | V-Tech |
Country of Origin | Made in India |
Description:
The head is fitted with a two speed elevating mechanism for quick and precise positioning of the penetration tip. Penetrationis shown on a 150mm dial, graduated 400 × 0.1mm increments, equipped with a slipping clutch pointer. The machinedaluminum base has an integral spirit level.
Supplied with 47.5g standard plunger, 50g and 100g plunger weights, and instruction manual
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 24.57 Lakh /Piece Get Latest Price
Usage/Application | Laboratory |
Top Inking Roller With | 4 Segments |
Printing Spool Width | 35/50 mm |
Inking Speed | 0.2 - 10m/s |
Distribution Time | 5-300Sec |
Temperature Range | 5-55 Degree C |
Country of Origin | Made in India |
The V-Tech High Speed Inking unit is designed for quick inking of Multi- color (up to 4 colors) spools to be used on Printability tester VT92NM for quick, repeatable and high accuracy proofing & colormatching of all types of litho, web-offset, letterpress inks and varnishes. VT92HI saves time for performing multi- colour printing in V-Tech Printability tester VT92NM and allows user to print wet on wet printing up to 5 color insingle operation and many other print test for ink and paper analysis.
Features:
₹ 310 /Piece Get Latest Price
Usage/Application | Laboratory |
Brand | V-Tech |
Weight | 20 kg |
Power | 230V 50/60Hz |
Steel Bowl & Stirrer Blades | 2 nos |
Country of Origin | Made in India |
V-Tech automatic Ink Water Emulsication Tester produces accurate, repeatable water pickup test for lithographic materials and is the instrument as specied in ASTM D4942. It is an automated programmable device employing a rotating set of mixer blade and a rotating ink sample beaker, ideally suited for water/fount-solution emulsication testing of printing ink and varnish for consistent performance on offset printing presses.The transfer of the dampening solution to the ink surface on the plate and ink form rollers is inherent in the printing process and the major weakness of lithography. If dampening solution, revolution by revolution, accumulates on the ink surfaces, it will interfere with and eventually prevent the critical ink transfer. This dampening solution can only be removed by emulsification into the ink. Therefore, lithography depends on the ink’s ability to emulsify the dampening solution which during the process, is unavoidably applied to the plate surface. The medium which is printed on the substrate is not the ink as was applied to the press but an emulsion of aqueous dampening solution in the continuous hydrophobic phase.
Features:
₹ 52,450 /Piece Get Latest Price
Material | Mild Steel |
Automation Grade | Automatic |
Type of Testing Machines | Plastic Testing Machine, Milk Testing Machine, Gold Testing Machine, Compression Testing Machine |
Brand | V-TECH |
Warranty | 10 Month |
Model Name/Number | VT |
Minimum order quantity: 1 Piece
The Flexural Testing Machine consists of a motorized load frame. The lower platen has two rollers, the distance between which is adjustable. For 150 mm x 150 mm x 700 mm beam, the centre distance between the rollers is 600 mm, while it is 400 mm for beams of size 100 mm x 100 mm x 500 mm. The upper platen has also a pair of rollers whose distance adjustable. It is 200 mm centre to centre, for 150 mm x 150 mm x 700 mm size beam and 133 mm for 100 mm x 100 mm x 500 mm size beam. Total capacity of the machine is 100 KN. 150mm dia pressure gauge of 0-100 KN x 1 KN least count to indicate load is fixed on the load frame. A separate electrically cum hand operated pumping unit housed in a cabinet is supplied. On/Off switch and a slow/fast lever to control rate of loading are fitted on the front panel of the pumping unit. A facility for hand operation is provided. A micro switch and relay fitted inside the pressure gauge protect the unit from over loading.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 1.50 Lakh /Piece Get Latest Price
Brand | VTECH |
Resolution | 0.01mpa (1psi) |
Color | Black |
Size | 20mm (standard); 10,14,50mm (optional) |
Weight | 3 kg |
Adhesion Tester Size | 360x75x115mm (LxWxH) |
Accuracy | +/-1% full scale |
Country of Origin | Made in India |
In order to perform satisfactorily, coatings must adhere to the substrates on which they are applied. In practice, three different test procedures are used to assess the resistance of paints and coatings to separation from substrates.
₹ 1.80 Lakh /Piece Get Latest Price
Automation Grade | Automatic |
Display Type | LCD Touch Screen |
Brand | V-Tech |
Power | 230V |
Country of Origin | Made in India |
Features:
₹ 1.50 Lakh /Piece Get Latest Price
Usage/Application | Industrial |
Display Type | Digital |
Brand | V-Tech |
Automation Grade | Automatic |
Accuracy | +1% |
Electric Supply | kw |
Feature:
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 50,000 /Piece Get Latest Price
Model Name/Number | VT |
Brand | V Tech |
Weight | Upto 12 kg |
Display Type | Digital |
Size | 400 x 200 x 200 mm |
Charging Time | 4-6 Hours |
Power Supply | Input : AC 220V 50Hz Output : DC 10V 300mA |
Country of Origin | Made in India |
V-Tech Bottle Cap Torque Testers VBT Series are a Torque-Measuring Device specially designed to work on Bottle Caps. The exact determination, especially of the opening torque, is a Quality-Defining Factor and provides Reliable Assurance and Documentation that bottle caps have been closed with the appropriate amount of Torque. Even child-resistant caps requiring downward force during the opening operation can be tested.
Features :-
1.Precise Measurement of Cap Torque. 2.Flexible Bottle Holder.
3.Universal or Custom-Made Cap Adapters. 4.Ideally Suited for Child-Resistant Closures. 5.Printing of Reports.
6.Measurement In N, kgf or lbf.
7.USB Interface.
8.Display Test Force Graph and Detailed Test Process on the Computer.
9. Saves upto 99 Groups of the Test Data.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 30,550 /Piece Get Latest Price
Brand | V-Tech |
Working Temperature | 1150 DegreeC |
Rating | 2 KW |
Insulation | Ceramic fiber wool insulation |
Operation | 220/230 Volts, Single phase, AC Supply |
Working Size | 225 D x 100 W x 100 Hmm |
Maximum Temperature | 1200 DegreeC |
Country of Origin | Made in India |
This test method covers the determination of ash in the range 0.001 - 0.180 mass %, from distillate and residual fuels, gas turbine fuels, crude oils, lubricating oils, waxes, and other petroleum produts, in which any ash-forming materials present are normally considered to be undesirable impurities or contaminants. The test method is limited to petroleum products which are free from added ash- forming additives, including certain phosphorus compounds.
Nunes Instruments , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty.
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
Laboratory Instrument, Test Equipment,Scientific, Measuring, Precision Instrument,Analytical, Bio Medical, Survey, Electrical,Electronic Instruments ,Weather, Metrology.
₹ 99,000 /Piece Get Latest Price
Type | Air Compressor Test Rig |
Material | Mild Steel |
Brand | V TECH |
Voltage | 220 V |
Frequency | 50 Hz |
Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Axial fans are used to transport gases. The medium to be transported is drawn in axially to the drive shaft of the axial fan by the rotation of the rotor. The medium flows through the rotor and is discharged axially behind the rotor. The experimental unit provides the basic experiments to get to know the operating behaviour and the important characteristic variables of axial Fans. Axial fan with variable speed via an integrated controller, an intake pipe and a delivery pipe. The transparent intake and delivery pipes are fitted with guide plates for flow guidance. A flow straightener in the intake pipe serves to calm the air. This enables precise measurements even with heavily reduced operation. The air flow is adjusted by a throttle valve at the end of the delivery pipe.The experimental unit is fitted with U tube manometer for pressure measurement and sensor for temperature . The flow rate is determinated via inclined manometer with orifice.
Features :
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 1 Lakh /Piece Get Latest Price
Material | Body and barrel - Anodised aluminiumFeet and Belleville washers |
Brand | V-TECH |
Color | grey and black |
Diameter | 103 mm (4.1") including legsNet |
Gross Weight | 5 kg (11 lb) |
Range | 0 MPa to 3.5 MPa (0 PSI to 500 PSI) |
Weight | 2 kg (4.4 lb) |
Country of Origin | Made in India |
We are engaged in providing the broad assortment of "Adhesion Testers ". Adhesion testers verifythat both surface preparation and coating application are within speci cation.Adhesion Tester is designed to determine the bond strength of coatings appliedto concrete surfaces.It will also test the tensile strength of hardened concrete on site. The Adhesion Tester employs apull-off method to determine the force required to pull a test dolly of xedarea of coating awayfrom the concrete.
₹ 2,300 /Piece Get Latest Price
Packaging Type | Box |
Display Type | Digital |
Brand | V Tech |
Accuracy | 0.1% |
Measuring Range | 0 to 25mm |
Resolution | 0.01mm |
Approx. weight | 0.3Kg |
Base diameter | 150 mm |
Base clearance tester is used for measuring gap between base dome and bottle base.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 19,500 /Piece Get Latest Price
Temperature Range | Max 300 Degree C (Option: 400 DegreeC) |
Brand | V-Tech |
Power | AC220V, I- Phase, 15 A, 50Hz (ISO-1133-2 Compatible type) |
Hangings | 12, 24, 50 Hangings (3kinds) |
Weight | 0.325 - 0.326 kgf |
Air source | 0.5 Mpa or More |
Country of Origin | Made in India |
Melt Flow Index Apparatus for plastic measures the melt flow index of plastic material. The system consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruder tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The heater logged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with a insulation of PTFE to prevent sticking of the extrudate. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER & other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extrudate are also supplied with the equipments.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 68,000 /Piece Get Latest Price
Display Type | Digital |
Opening In Lower Clamp | 38.1 mm diameter |
Brand | V-tech |
Test fluid | Glycerin |
Gear Box | Worm reduction type |
Least Count | 0.1 kg |
Capacity | 0-50kg |
Power required | 500w, single phase, 220vac |
Opening in upper clamp | 30.5 mm diameter |
Rate of fluid displacement | 95 cc/ minute |
Country of Origin | Made in India |
Bursting Strength Tester of any material such as fabric, leather, paper, paper board & corrugated box etc. Its strength under multi- directional force and is defined, as the hydrostatic pressure required producing rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm.The “INSTRUMENTATION ” Bursting Strength Tester is designed to bursting strength of fabric/ leather/ paper/paper board & corrugated box. A test specimen is held between two annular clamps under suf cient pressure to minimize slippage. The clamping is done by hand wheel/screw arrangement or by pneumatic pressure with pressure gauge, solenoid valve and pressure regulator as per model. The upper clamping surface which is in contact with the test specimens has a continuous spiral grooves. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface is below the plane of the clamping surface.
₹ 19,600 /Piece Get Latest Price
Material | SS 304 |
Brand | V-TECH |
Maximum Height | 400 mm |
Multi Purpose can be used for | PET, Glass or Cans |
Thermometer | Digital type with dual output Deg, Centigrade and Fahrenheit |
Pressure Range | 0-7 Kg/ cm2 |
Maximum Bottle diameter | 110 mm |
Minimum order quantity: 1 Piece
Gas Volume Tester is used for measuring content in carbonated beverages.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 22,000 /Piece Get Latest Price
Brand | V-Tech |
Type | CO2 Gas Purity Tester with Absorption Burette |
Scale | 99 - 100% |
Graduation | 0.025% |
Purity measurement | Up to 2 decimal places |
Material of Construction | Glass with calibrated neck |
Wooden Cover for protection | Included |
Country of Origin | Made in India |
Stand, Bands, Reservoir, Graduated Burette and Wooden cover for protection. Operation manual shall be provided for checking the purity of CO2 gas.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 85,000 /Piece Get Latest Price
Pressure Indicator | 0-300 PSI / 21 kg/cm2 |
Testing Chamber | Stainless steel with Polycarbonate Inspection Window |
Brand | V TECH |
Inlet Pressure | 175 psi / 12 Bar(To be controlled externally) |
Input Medium | Carbon Di Oxide / Air / Nitrogen |
Inlet Conn Size | 1/4" BSP |
Minimum order quantity: 1 Piece
Bottle Closure Seal Tester is designed to check bottle and closure thread integrity and Seal strength for Glass / PET Beverage bottles with Plastic Closures most useful for Carbonated Drinks.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 4,050 /Piece Get Latest Price
Brand | V-Tech |
Digital Vaccum | Piercing Area |
Packaging Type | Box |
Bottle type | 28mm PCO neck (other sizes available on request) |
Display Type | Digital |
Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Used for measuring vacuum inside filled bottle. It consists of a piercing arrangement with Digital Vacuum gauge Piercing area is sealed beofre actualpiercing takes place. When the closure is pierced peak reading is recorded. Digital Pressure gauge records output and same is noted.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 30,000 /Piece Get Latest Price
Material | Stainless Steel |
Packaging Type | BOX |
Display Type | Digital |
Frequency | 50 Hz |
Temperature | 200 DegreeC +-0.5 DegreeC |
Brand | V TECH |
Minimum order quantity: 1 Piece
Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a PID controlled heating chamber at specified temp. of 200°C ±0.5°C.
Features:
• Strong construction
• Excellent performance
• Easy to use
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 16,200 /Piece Get Latest Price
Packaging Type | Box |
Brand | V TECH |
Display Type | Digital |
Capacity | 500 gm x 0.1 gm |
Sled size | 63.5 x 63.5 x 6 mm |
Weight of sled | 200 +- 5 gm |
Speed of traverse of plane | 150 +- 30 mm/min |
The V-Tech COF tester –horizontal plane have a Sled of specified dimensions with a suitable eye screw fastened in one end for the holding to the load cell by a flexible nylon thread. There is a moving plane which is polished plastic, of specified dimensions. A smooth, flat piece of glass covers the upper surface of the plane. This provides a smooth support for the specimen. The plane moved with the help of the motor.
The force is indicating on the digital display which indicates the frictional force.
All the parts are either painted or bright chrome platted for the corrosion resistance long life.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 18,000 /Piece Get Latest Price
Brand | V Tech |
Accuracy | 0.01% |
Display | LCD Display |
Range | 0-12mm |
Least count | 0.001mm |
Approx. weight | 4Kg |
Eccentricity Tester is useful to check the eccentricity of preforms or bottles. It is provided by digital gauge for more accurate measurements.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 2.83 Lakh /Piece Get Latest Price
Material | Stainless Steel |
Voltage | 230 V |
Automation Grade | Automatic |
Frequency | 50 Hz |
Phase | 1 Phase |
Power Source | Electric |
Leak tester is designed for plastic bottles or containers leak testing bottle leak testing machine will check the bottlers whether it will leak or not. There will be an auto-rejection system for leaked bottles. This system can be online with eminencemake bottle unscramble or bottle de-flasher machine.Engaged in providing a wide range of bottle leak testing machine. Successfullymeeting the demands of food /edible & lubricant oil /cosmetic and pharmaceutical& plastic/ pet bottle manufacture industry, where our range is used for testing theseal of soft packaging. Bottle leak testing machine is suitable for every kind of containers and bottles.Detects micro / pin holes with great repeatability.Stores up to 10 different parameter settings and are adjustable during testing.Imported make valves & cylinder.Imported pressure sensor for accurate & consistent measurement.Adjustable test heads.Quick changeover of various bottles without change part tooling.Easy setup via touchscreen.Typically able to test most bottles for a 0.17 mm pinhole of 0.5 -1 liter at 3600 bph.
Nunes Instruments , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty.
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
Laboratory Instrument, Test Equipment, Scientific, Measuring, Precision Instrument, Analytical, Bio Medical, Survey, Electrical, Electronic Instruments ,Weather, Metrology.
₹ 42,500 /Piece Get Latest Price
Material | Metal |
Frame Size | 900 mm L X 600 mm B X 750mm H |
Brand | V-Tech |
Size | 900 mm L X 600 mm B X 750 mm |
Shape | Rectangle |
Country of Origin | Made in India |
We are engaged manufacturing and supplying adistinguished range of Laboratory Anti-Vibration Table.
Features:
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 87,500 /Piece Get Latest Price
Power Supply | 9V battery 216 P type |
Sample dimension | 50X50mm |
Max. matrix thickness | 0.8mm |
Brand | V TECH |
Range | 0.0 to 100% |
Accuracy | less than equal to 2% |
Measuring range | 0.0 to 100.0% |
Country of Origin | Made in India |
Transparency tester is used to check the transparency of wall of pet preforms & bottles.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 50,000 /Piece Get Latest Price
Material | Mild Steel |
Frequency | 50 Hz |
Voltage | 220 V |
Surface Finishing | Color Coated |
Brand | V-Tech |
Country of Origin | Made in India |
Minimum order quantity: 1 Piece
Country of Origin - Made in IndiaMaterial - Mild SteelFrequency - 50 HzVoltage - 220VBrand- V-TechSurface Finish - Color Coated
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 91,000 /Piece Get Latest Price
Material | Stainless Steel |
Packaging Type | Wooden Box |
Brand | V TECH |
Voltage | 220 V |
Test Piece | 60X60 mm |
Loading Method | Dynamic Load |
Control | Manual Control |
Minimum order quantity: 1 Piece
We are offering Rub Proofness Tester to our client.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 24,000 /Piece Get Latest Price
Material | Stainless Steel |
Automation Grade | Automatic |
Warranty | 1 Year |
Packing Type | Box |
Brand | V TECH |
Base dimension | 1200 X 900 mm |
Minimum order quantity: 1 Piece
We are offering Vertical Impact Drop Tester.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
₹ 25,000 /Piece Get Latest Price
Brand | V Tech |
Max Capacity | 50 kg(other capacities on customer request) |
Readability | 0.01 Kgf |
Display: | LED Display |
Span / Height | 400mm |
Speed of compressing | 5mm or 10mm per minute |
Accuracy | +- 1% |
This fully automatic motorized Top Load Tester gives the compressive buckling load in digital format. The Digital display is a high end sophisticatedread out with Auto Tare (ZERO) set facility and Peak Hold arrangement. Theload sensor can be calibrated in-house. The bottle needs to be placed inbetween the inverted concave jaws for zero slip gripping.
Specifications(Digital Model):
Max Capacity : 50 kg(other capacities on customer request),
Readability: 0.01 Kgf,
LED Display,
Accuracy: ± 1%.
Peak hold locking,
Span / Height - 400mm (or as per customer requirement),
Base size – As per customer requirement/samples,
Speed of compressing - 5mm or 10mm per minute,
Forward and reverse function.
Instrumentation , is in the field of Instrumentation Sales Service & Repairs with 40 years of experience. We provide service & repairs to your old high precision instruments and equipment. We provide cost effective service & Repair to any brand, any make instruments with service warranty. Why not try once?
Instruments of Any Type, Any Make, Analog/Digital, Any Condition Indian or Imported
Krishna Moorthi (Manager Technical)
Instrumentation
6, G.j Chandran Shopping Complex, Head Quarters Road
Coimbatore - 641018, Tamil Nadu, India